Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air

Mohamed A. Khater

doi:doi:10.11648/j.wjap.20160101.12

| Peer-Reviewed

Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air

Mohamed A. Khater

Published in World Journal of Applied Physics (Volume 1, Issue 1)

Received: 10 May 2016 Accepted: 20 July 2016 Published: 6 August 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this study, we present results regarding the application of a relatively simple bench-top laser-induced breakdown spectroscopic (LIBS) technique working in the UV/visible spectral region for the rapid, direct and sensitive quantification of the element carbon in steel alloys under ambient air standard conditions. We carry out further optimization studies and investigate the influence of the gate delay time of the electron multiplier charged-coupled device (EMCCD) detector on the emission properties, namely signal and background intensities as well as signal-to-background ratio (SBR), of the previously selected CI 396.14 nm spectral line. Moreover, we study and compare various methods employed to construct analytical calibration functions of the carbon line under investigation. Furthermore, the analytical figures of merit are evaluated in each case.

Published in	World Journal of Applied Physics (Volume 1, Issue 1)
DOI	10.11648/j.wjap.20160101.12
Page(s)	16-19
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Detection, Carbon, Steel, LIBS, Air

References

[1]	M A Khater, Laser-Induced Breakdown Spectroscopy (LIBS) for Light Elements Detection in Steel: State of the Art (invited review), Spectrochim. Acta Part B 81 (2013) 1–10.
[2]	J. Aguilera, C. Aragon, J. Campos, Determination of Carbon Content in Steel Using Laser-Induced Breakdown Spectroscopy. Appl. Spectrosc. 46 (1992) 1382–1387.
[3]	R. Sattmann, V. Sturm, R. Noll, Laser-Induced Breakdown Spectroscopy of Steel Samples Using Multiple Q-Switch Nd:YAG Laser Pulses, J. Phys. D: Appl. Phys. 28 (1995) 21812187.
[4]	A. Gonzalez, M. Ortiz, and J. Campos, Determination of Sulfur Content in Steel by Laser-Produced Plasma Atomic Emission Spectroscopy, Appl. Spectrosc. 49 (1995) 1632–1635.
[5]	V. Sturm, L. Peter, R. Noll, Steel Analysis with Laser-Induced Breakdown Spectrometry in the Vacuum Ultraviolet, Appl. Spectrosc. 54 (2000) 1275–1278.
[6]	M. Khater, P. van Kampen, J. Costello, J-P. Mosnier, E. Kennedy, Time-integrated laser-induced plasma spectroscopy in the vacuum ultraviolet for the quantitative elemental characterization of steel alloys, J. Phys. D: Appl. Phys. 33 (2000) 2252–2262.
[7]	M. Hemmerlin, R. Meilland, H. Falk, P. Wintjens, L. Paulard, Application of Vacuum Ultraviolet Laser-Induced Breakdown Spectrometry for Steel Analysis  Comparison with Spark-Optical Emission Spectrometry Figures of Merit. Spectrochim. Acta B 56 (2001), 661669.
[8]	M. Khater, J. Costello, E. Kennedy, Optimization of the Emission Characteristics of Laser-Produced Steel Plasmas in the Vacuum Ultraviolet: Significant Improvements in Carbon Detection Limits, Appl. Spectrosc. 56 (2002) 970–983.
[9]	L. Peter, V. Sturm, R. Noll, Liquid Steel Analysis with Laser-Induced Breakdown Spectrometry in the Vacuum Ultraviolet, Appl. Opt. 42 (2003) 6199–6204.
[10]	I. Radivojevic, C. Haisch, R. Niessner, S. Florek, H. Becker-Ross, U. Panne, Microanalysis by Laser-Induced Plasma Spectroscopy in the Vacuum Ultraviolet, Anal. Chem. 76 (2004) 1648–1656.
[11]	M. Khater, Application of Laser-ablated Plasmas to Compositional Analysis of Steel in the Vacuum Ultraviolet, J. Kor. Phys. Soc. 58 (2011) 1581–1586.
[12]	M. Khater, Spatial characteristics of vacuum UV emission from laser–induced plumes in air, Appl. Surf. Sci. 286 (2013) 156–160.
[13]	A. A. M. Habib, Calculation of the mean probability of photon capture for vacuum UV line emission of fluorine in the case of a thermal plasma mixture, Spectrochim. Acta Part B 96 (2014) 74–79.
[14]	X. Jiang, P. Hayden, J. T. Costello, E. T. Kennedy, Double-pulse laser induced breakdown spectroscopy with ambient gas in the vacuum ultraviolet: Optimization of parameters for detection of carbon and sulfur in steel, Spectrochim. Acta Part B 101 (2014) 106–113.
[15]	Y. Ishibashi, Rapid Analysis of Steel by Inductively Coupled Plasma-Atomic Emission Spectrometry and Mass Spectrometry with Laser Ablation Solid Sampling, ISIJ Int. 37 (1997) 885891.
[16]	F. De Lucia, Jr., J. Gottfried, A. Miziolek, Analysis of Carbon and Sulfur in Steel Samples Using Bench Top Laser-Induced Breakdown Spectroscopy (LIBS), General Books LLC, 2011.
[17]	C. M. Ahamer, S. Eschlböck-Fuchs, P. J. Kolmhofer, R. Rössler, N. Huber, J. D. Pedarnig, Laser-induced breakdown spectroscopy of major and minor oxides in steel slags: Influence of detection geometry and signal normalization, Spectrochim. Acta Part B 122 (2016) 157–164.
[18]	D. Hahn, N. Omenetto, Laser-Induced Breakdown Spectroscopy (LIBS), Part II: Review of Instrumental and Methodological Approaches to Material Analysis and Applications to Different Fields, Appl. Spectrosc. 66 (2012) 347–419.
[19]	R. Noll, Laser-Induced Breakdown Spectroscopy: Fundamentals and Applications, first ed., Springer-Verlag, Berlin, 2012.

Cite This Article

Plain Text BibTeX RIS

APA Style

Mohamed A. Khater. (2016). Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air. World Journal of Applied Physics, 1(1), 16-19. https://doi.org/10.11648/j.wjap.20160101.12

Copy | Download

ACS Style

Mohamed A. Khater. Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air. World J. Appl. Phys. 2016, 1(1), 16-19. doi: 10.11648/j.wjap.20160101.12

Copy | Download

AMA Style

Mohamed A. Khater. Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air. World J Appl Phys. 2016;1(1):16-19. doi: 10.11648/j.wjap.20160101.12

Copy | Download

@article{10.11648/j.wjap.20160101.12,
  author = {Mohamed A. Khater},
  title = {Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air},
  journal = {World Journal of Applied Physics},
  volume = {1},
  number = {1},
  pages = {16-19},
  doi = {10.11648/j.wjap.20160101.12},
  url = {https://doi.org/10.11648/j.wjap.20160101.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wjap.20160101.12},
  abstract = {In this study, we present results regarding the application of a relatively simple bench-top laser-induced breakdown spectroscopic (LIBS) technique working in the UV/visible spectral region for the rapid, direct and sensitive quantification of the element carbon in steel alloys under ambient air standard conditions. We carry out further optimization studies and investigate the influence of the gate delay time of the electron multiplier charged-coupled device (EMCCD) detector on the emission properties, namely signal and background intensities as well as signal-to-background ratio (SBR), of the previously selected CI 396.14 nm spectral line. Moreover, we study and compare various methods employed to construct analytical calibration functions of the carbon line under investigation. Furthermore, the analytical figures of merit are evaluated in each case.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air
AU  - Mohamed A. Khater
Y1  - 2016/08/06
PY  - 2016
N1  - https://doi.org/10.11648/j.wjap.20160101.12
DO  - 10.11648/j.wjap.20160101.12
T2  - World Journal of Applied Physics
JF  - World Journal of Applied Physics
JO  - World Journal of Applied Physics
SP  - 16
EP  - 19
PB  - Science Publishing Group
SN  - 2637-6008
UR  - https://doi.org/10.11648/j.wjap.20160101.12
AB  - In this study, we present results regarding the application of a relatively simple bench-top laser-induced breakdown spectroscopic (LIBS) technique working in the UV/visible spectral region for the rapid, direct and sensitive quantification of the element carbon in steel alloys under ambient air standard conditions. We carry out further optimization studies and investigate the influence of the gate delay time of the electron multiplier charged-coupled device (EMCCD) detector on the emission properties, namely signal and background intensities as well as signal-to-background ratio (SBR), of the previously selected CI 396.14 nm spectral line. Moreover, we study and compare various methods employed to construct analytical calibration functions of the carbon line under investigation. Furthermore, the analytical figures of merit are evaluated in each case.
VL  - 1
IS  - 1
ER  -

Copy | Download

Author Information

Mohamed A. Khater

Spectroscopy Department, Physics Division, National Research Centre (NRC), Giza, Egypt

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mohamed A. Khater. (2016). Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air. World Journal of Applied Physics, 1(1), 16-19. https://doi.org/10.11648/j.wjap.20160101.12

Copy | Download

ACS Style

Mohamed A. Khater. Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air. World J. Appl. Phys. 2016, 1(1), 16-19. doi: 10.11648/j.wjap.20160101.12

Copy | Download

AMA Style

Mohamed A. Khater. Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air. World J Appl Phys. 2016;1(1):16-19. doi: 10.11648/j.wjap.20160101.12

Copy | Download

@article{10.11648/j.wjap.20160101.12,
  author = {Mohamed A. Khater},
  title = {Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air},
  journal = {World Journal of Applied Physics},
  volume = {1},
  number = {1},
  pages = {16-19},
  doi = {10.11648/j.wjap.20160101.12},
  url = {https://doi.org/10.11648/j.wjap.20160101.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wjap.20160101.12},
  abstract = {In this study, we present results regarding the application of a relatively simple bench-top laser-induced breakdown spectroscopic (LIBS) technique working in the UV/visible spectral region for the rapid, direct and sensitive quantification of the element carbon in steel alloys under ambient air standard conditions. We carry out further optimization studies and investigate the influence of the gate delay time of the electron multiplier charged-coupled device (EMCCD) detector on the emission properties, namely signal and background intensities as well as signal-to-background ratio (SBR), of the previously selected CI 396.14 nm spectral line. Moreover, we study and compare various methods employed to construct analytical calibration functions of the carbon line under investigation. Furthermore, the analytical figures of merit are evaluated in each case.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Low Level Carbon Detection in Steel Alloys Based on Optimization of Observation Conditions of Laser-Induced Breakdown Spectroscopy (LIBS) in Ambient Air
AU  - Mohamed A. Khater
Y1  - 2016/08/06
PY  - 2016
N1  - https://doi.org/10.11648/j.wjap.20160101.12
DO  - 10.11648/j.wjap.20160101.12
T2  - World Journal of Applied Physics
JF  - World Journal of Applied Physics
JO  - World Journal of Applied Physics
SP  - 16
EP  - 19
PB  - Science Publishing Group
SN  - 2637-6008
UR  - https://doi.org/10.11648/j.wjap.20160101.12
AB  - In this study, we present results regarding the application of a relatively simple bench-top laser-induced breakdown spectroscopic (LIBS) technique working in the UV/visible spectral region for the rapid, direct and sensitive quantification of the element carbon in steel alloys under ambient air standard conditions. We carry out further optimization studies and investigate the influence of the gate delay time of the electron multiplier charged-coupled device (EMCCD) detector on the emission properties, namely signal and background intensities as well as signal-to-background ratio (SBR), of the previously selected CI 396.14 nm spectral line. Moreover, we study and compare various methods employed to construct analytical calibration functions of the carbon line under investigation. Furthermore, the analytical figures of merit are evaluated in each case.
VL  - 1
IS  - 1
ER  -

Copy | Download